Home / Product / Mini / 18×8.5 / 18×9.0 Forged Two-Piece Wheels for 2012 MINI John Cooper Works Coupé (R58) – Widebody Fitment, Electroplated Gold Multi-Spoke 4×100

18×8.5 / 18×9.0 Forged Two-Piece Wheels for 2012 MINI John Cooper Works Coupé (R58) – Widebody Fitment, Electroplated Gold Multi-Spoke 4×100

Model: RC450-2XXT

Developed for a 2012 MINI John Cooper Works Coupé (R58) with a widebody conversion, this custom forged wheel project combines staggered 18-inch sizing, a distinctive multi-spoke face, and a full electroplated gold finish.

The front configuration uses an 18×8.5 wheel with ET+14 offset, while the rear uses an 18×9.0 wheel with ET+10. Both positions feature a 4×100 bolt pattern and a 56.1 mm center bore.

Unlike conventional monoblock wheels, this design uses a genuine two-piece forged construction, with a separately manufactured forged center connected to the lip and barrel through a full perimeter bolt circle. The Y-split multi-spoke face, pointed spoke facets, and deep stepped outer lip create a distinctive appearance for the widened R58 body.

Read More
MINI John Cooper Works Forged Wheels in Electroplated Gold
Play Video
18 Inch Gold Two-Piece Forged Wheels with Deep Stepped Lips
Electroplated Gold Multi-Spoke Forged Wheel with 4x100 PCD
Y-Split Starburst Spokes on Electroplated Gold Forged Wheel
MINI R58 Widebody Two-Piece Forged Wheel in Metallic Gold
Gold Two-Piece Forged Wheel with Deep Barrel and Stepped Lip
prev
next
MINI John Cooper Works Forged Wheels in Electroplated Gold
18 Inch Gold Two-Piece Forged Wheels with Deep Stepped Lips
Electroplated Gold Multi-Spoke Forged Wheel with 4x100 PCD
Y-Split Starburst Spokes on Electroplated Gold Forged Wheel
MINI R58 Widebody Two-Piece Forged Wheel in Metallic Gold
Gold Two-Piece Forged Wheel with Deep Barrel and Stepped Lip
Request Quote

R58 Widebody Fitment

Two-Piece Forged Construction

Electroplated Gold Finish

Specifications

Item Specification
Model No.

RC450-2XXT

Size

Front Size: 18×8.5

Rear Size: 18×9.0

PCD

4×100

Offset (ET)

Front Offset: ET+14

Rear Offset: ET+10

Center Bore

56.1 mm

Weight

11.7 kg / 11.8 kg

Load Rating

Not stated on the specification plate

Lug Seat

Not stated on the specification plate

Finish

Electroplated Gold (full wheel)

Construction

Forged Two-Piece

Fitment Basis Check Data
Lead Time 45 days
  • Descriptions
    xiajiantou

    Engineering Notes

    Three engineering decisions define this MINI JCW R58 widebody wheel project: axle-specific offset selection, a bolted two-piece forged assembly, and full electroplated gold finishing.

    First, the staggered offsets were selected for the modified R58 body rather than the factory wheel arches. The front 18×8.5 wheel uses ET+14, while the rear 18×9.0 wheel uses ET+10. This combination positions the wheels around the widened fender profile. These specifications are not intended for standard-body R58 models. Inner clearance at the front strut, rear suspension, brake components, and wheel liners must still be measured on the actual vehicle. Tire section width and achieved camber also affect the final position.

    Second, this project uses a genuine two-piece forged wheel assembly. The forged center is manufactured separately from the outer lip and barrel, then connected through a full perimeter bolt circle. This construction allows the center's Y-split multi-spoke pattern and the outer rim profile to be developed independently. The front wheel weighs 11.7 kg and the rear weighs 11.8 kg. The perimeter fasteners are structural assembly components, not beadlock hardware.

    Third, the entire wheel receives an electroplated gold finish rather than conventional gold paint. Surface preparation and polishing are followed by activation and metallic plating. The pointed spoke facets, narrow Y-shaped junctions, recessed openings, stepped lip, and barrel require controlled plating coverage. Maintaining consistent metallic color across these different geometries is an important part of the finishing process and contributes to the 45-day manufacturing schedule.

    From Design to Delivery

    Day 1

    Vehicle application, widebody state and submitted dimensions confirmed

    Day 5

    Multi-spoke face, stepped lip and plating scheme approved

    Day 14

    Forged centre blanks produced; lip and barrel formed

    Day 21

    Hub pad, Y-split spokes and pointed facets CNC-machined

    Day 27

     8.5 and 9.0 inch barrels and stepped lip profiles machined

    Day 32

    Two-piece assembly completed; perimeter bolts torqued

    Day 36

    Surfaces polished and prepared for plating

    Day 40
    -
    43

    Gold electroplating completed and inspected

    Assembly hardware plated and checked; final sealing

    Day 45

    Final inspection, balancing, packing and shipment

    Quality Verified

    • Front 18×8.5 and rear 18×9.0 dimensions inspected.
    • Front ET+14 and rear ET+10 offsets checked.
    • 4×100 bolt pattern verified.
    • 56.1 mm center bore checked.
    • Front and rear wheel weights verified at 11.7 kg and 11.8 kg.
    • Forged center-to-barrel seating inspected.
    • Perimeter assembly bolts torqued and marked.
    • Y-split spoke junctions and pointed facets inspected.
    • Stepped outer lip geometry and depth checked.
    • Electroplating coverage checked around spoke edges and recessed sections.
    • Gold color consistency and plating adhesion inspected.
    • Radial and lateral runout checked.
    • Dynamic balancing completed for each wheel.
    • Lug-seat specification and wheel load rating require confirmation before installation.

    Result

    The completed MINI John Cooper Works forged wheel set provides a staggered 18-inch configuration developed around the widened arches of the R58 Coupé.

    The front 18×8.5 ET+14 and rear 18×9.0 ET+10 arrangement creates an axle-specific wheel position, while the Y-split multi-spoke face maintains a detailed starburst appearance across both widths.

    The two-piece construction separates the forged center from the lip and barrel, allowing the stepped outer profile to be developed independently. Full electroplated gold treatment connects the wheel face, outer lip, and barrel with a consistent metallic appearance.

    The finished specification is intended for the documented widebody application. Actual tire dimensions, suspension clearance, brake clearance, and mounting hardware must be verified before installation.

    XINGTU can build two-piece and three-piece forged wheels around your measured arch clearance, brake package, suspension setup and target stance, with electroplated gold, chrome, brushed or two-tone finishes.

  • Build & Fitment
    xiajiantou

    Staggered 18-Inch Fitment for the R58 Widebody

    This MINI JCW R58 wheel package uses different front and rear dimensions to accommodate the modified body profile.

    • Front: 18×8.5, ET+14

    • Rear: 18×9.0, ET+10

    • Bolt Pattern: 4×100

    • Center Bore: 56.1 mm

    The wider rear configuration and axle-specific offsets are developed around the vehicle's widened fenders rather than the original factory body dimensions. This setup should not be treated as a direct-fit option for a standard R58.

    Physical Clearance Checks Before Fitment Approval

    Wheel width and offset alone cannot establish complete vehicle compatibility. The actual widebody vehicle must be checked for both outer fender position and inner mechanical clearance.

    The fitment assessment should cover:

    • Front strut and brake caliper clearance.

    • Rear suspension and trailing arm clearance.

    • Inner barrel and wheel liner clearance.

    • Outer fender and arch clearance.

    • Tire section width and sidewall position.

    • Front and rear camber settings.

    These measurements help determine whether the selected 18-inch staggered configuration works with the vehicle's actual suspension and tire setup.

    Two-Piece Assembly and Electroplated Gold Finish

    The forged center and separate lip and barrel are joined through perimeter assembly fasteners to create the completed two-piece wheel. This structure allows different spoke profiles, rim widths, and stepped lip designs to be developed for custom applications.

    The full electroplated gold treatment is applied across the wheel assembly rather than using a painted gold face. The finish requires consistent coverage around the Y-split spokes, recessed areas, outer lip, and barrel.

    Before installation, the final hardware seat type, fastener specifications, wheel load rating, and vehicle mounting requirements must be confirmed.

  • FAQs
    xiajiantou

    1. Are These MINI John Cooper Works Forged Wheels Compatible with the R58 Widebody?

    These forged wheels are developed specifically for the 2012 MINI John Cooper Works Coupé (R58) with a widebody conversion. The front 18×8.5 ET+14 and rear 18×9.0 ET+10 configurations are designed around the modified fender dimensions. Standard-body R58 vehicles require a separate fitment assessment.

    2. What Are the Front and Rear Specifications of These MINI JCW R58 Wheels?

    The front wheels measure 18×8.5 with ET+14 offset, while the rear wheels measure 18×9.0 with ET+10 offset. Both use a 4×100 bolt pattern and a 56.1 mm center bore. This staggered configuration provides different wheel widths and offsets for the front and rear axles.

    3. Are These MINI Cooper Forged Wheels Monoblock or Two-Piece?

    These wheels feature genuine two-piece forged construction. The forged center is manufactured separately from the outer lip and barrel, then assembled using perimeter structural bolts. This construction allows the spoke face and stepped outer lip to be developed as separate components.

    4. What Makes the Electroplated Gold Finish Different from Gold Paint?

    The electroplated gold finish uses a metallic plating process rather than conventional gold paint. Surface preparation, polishing, and plating help create a reflective gold appearance across the multi-spoke face, stepped lip, and barrel. The complex Y-split spokes and recessed sections require careful finishing control.

    5. How Much Do the 18-Inch MINI JCW Forged Wheels Weigh?

    The front 18×8.5 wheel weighs approximately 11.7 kg, while the rear 18×9.0 wheel weighs approximately 11.8 kg. These are the specified project weights for the electroplated gold two-piece forged configuration.

    6. Can Custom Two-Piece Forged Wheels Be Developed for Other MINI R58 Widebody Builds?

    Yes. XT Forged can develop custom wheel configurations based on vehicle measurements, including wheel diameter, width, offset, spoke design, outer lip profile, and surface finish. Buyers should provide widebody dimensions, suspension details, brake specifications, and tire information for an engineering fitment assessment. The documented project production schedule is 45 days, subject to final specification approval.

Related Products