Developed around the submitted specifications for a 2026 Land Rover plug-in hybrid, this 22-inch forged monoblock wheel features a distinctive closed aero-disc face and a full gloss black finish. Unlike conventional multi-spoke SUV wheels, its front design uses a broad smooth dome, concentric center steps and a ring of short perimeter slots to create a clean, technical appearance.
The 22×9.0 configuration uses ET43 offset, a 5×120 bolt pattern and a 72.6 mm center bore. Its one-piece forged construction carries a rated load of 1,000 kg per wheel, with a finished weight of 18.3 kg. A separate 183 mm gloss black plastic aero cover closes the hub area, adding another distinctive element to the wheel design.
| Item | Specification |
| Model No. |
GD2609017-2290 |
| Size |
22×9.0 |
| PCD |
5×120 |
| Offset (ET) |
ET43 |
| Center Bore |
72.6 mm |
| Weight |
18.3 kg per wheel |
| Load Rating |
1,000 kg per wheel |
| Lug Seat |
16×38 60° taper |
| Finish |
Gloss Black (full paint) |
| Construction | Forged Monoblock |
| Fitment Basis | Check Data |
| Lead Time | 25 days |
XINGTU's engineering team focused on three defining aspects of this MINI John Cooper Works R58 wheel project: widebody-specific offset positioning, a two-piece forged construction with a deep stepped lip, and full-wheel gold electroplating.
The front and rear offsets were selected for the modified body configuration rather than the factory R58 wheel arches. The front wheels measure 18×8.5 ET+14, while the rear wheels measure 18×9.0 ET+10.
On a standard-body R58 Coupé, these wheel positions may extend beyond the original factory arch line. With the widebody conversion installed, the same offset values bring the wheel faces outward to match the widened fender profile.
The offset selection must also account for inner clearance. The inner barrel still needs sufficient space around the trailing arm, spring, inner liner and suspension components. Brake caliper clearance, front steering movement and tire section width must be checked against the completed widebody vehicle before final fitment approval.
This MINI JCW R58 wheel uses a two-piece bolted construction. The forged center is connected to a separate barrel and outer lip through a perimeter bolt circle.
The face features multiple Y-split spokes with pointed machined facets. Each spoke divides toward the outer section, creating a branching pattern that converges around the center mounting pad. This arrangement gives the wheel face a distinctive multi-spoke appearance while allowing the stepped outer lip to remain visually prominent.
The separate center and barrel also create a modular assembly rather than a one-piece wheel structure. The finished front and rear wheels weigh 11.7 kg and 11.8 kg respectively. Perimeter fasteners secure the two components together; this is a bolted two-piece forged wheel, not a beadlock design.
The entire wheel receives an electroplated gold finish rather than conventional gold paint. The process begins with substrate polishing and chemical activation before the wheel enters the plating bath.
The Y-split spokes and pointed facets require consistent plating coverage across narrow edges, junctions and recessed surfaces. The stepped lip, spoke face and barrel are processed within the same gold-finish specification to maintain a continuous appearance across the assembled wheel.
The plating process requires careful surface preparation, deposition control and final inspection. The perimeter bolt hardware is also plated and checked as part of the finishing sequence.
These multi-stage operations, combined with the separate two-piece assembly and final inspection, determine the 45-day production schedule.
Each wheel set undergoes dimensional, structural and surface-finish inspection to meet the specified widebody R58 configuration.
Dimensional Inspection
Structural Inspection
Gold Plating Inspection
Final Quality Control
Fitment Note: Lug-seat type and wheel load rating require confirmation before installation. Brake, suspension and widebody clearance must be verified on the actual vehicle.
Designed for the widebody MINI JCW R58 Coupé, this custom 18-inch staggered wheel set features 18×8.5 front and 18×9.0 rear sizing, with ET+14 and ET+10 offsets to complement the widened fender profile.
The Y-split multi-spoke face features pointed machined facets and a deep stepped lip, creating a distinctive starburst appearance. Full gold electroplating extends across the wheel face, outer lip and barrel, while the two-piece forged construction provides a modular center-to-barrel assembly.
This configuration combines widebody-specific fitment, detailed spoke machining and a consistent gold finish for a distinctive MINI JCW build.

XINGTU can develop forged monoblock, two-piece and three-piece wheels around your hub data, brake package, suspension setup and load requirement, with gloss black, satin, brushed or two-tone finishes and custom centre covers.
This 22×9.0 forged monoblock wheel features ET43 offset, a 5×120 bolt pattern and a 72.6 mm center bore. Since the exact Land Rover PHEV model has not been specified, final compatibility must be verified against the actual vehicle.
Check hub dimensions, mounting surface, 60° taper-seat fasteners and brake caliper clearance before installation. Suspension movement, air suspension clearance (where equipped), inner liner and wheel-arch space should also be assessed to confirm proper fitment.
The entire wheel features a uniform gloss black painted finish, covering the closed aero-disc face, concentric center details and outer barrel. Unlike two-tone or polished-face wheels, this design uses a consistent black surface across the complete wheel assembly.
Coating inspection focuses on gloss consistency, paint coverage and surface quality around the curved dome, recessed center steps and narrow perimeter slots, helping maintain a uniform appearance under different lighting conditions.
The 183 mm gloss black plastic center disc is a separate cosmetic component, not part of the load-bearing monoblock structure. It must be removed before tightening the wheel fasteners and reinstalled after the installation procedure is completed.
The closed-face design allows less airflow toward the brakes than conventional open-spoke wheels. Brake cooling requirements should therefore be considered for vehicles used for towing, carrying heavy loads or repeated hard braking. The center cover should also be checked for secure retention after installation.
These custom forged wheels are designed for the MINI John Cooper Works R58 Widebody, with specific front and rear offsets developed around the widened fender profile. Final fitment requires checking brake, suspension and wheel-arch clearance.
The staggered setup includes 18×8.5 ET+14 front wheels and 18×9.0 ET+10 rear wheels. Both use a 4×100 bolt pattern and 56.1 mm center bore.
Two-piece forged wheels feature a separate forged center and barrel joined by perimeter bolts. This construction allows greater flexibility in wheel width, offset and stepped-lip design for custom applications.
The Y-split spoke structure branches toward the outer rim, creating a distinctive starburst pattern. Pointed machined facets add detail to the wheel face and complement the deep stepped lip.
Yes. The entire wheel features a gold electroplated finish rather than conventional gold paint. The process includes surface preparation, chemical activation, plating and final finish inspection.
Yes. XT Forged offers custom wheel widths, offsets, spoke designs and surface finishes based on vehicle measurements, widebody specifications, brake clearance and suspension requirements.