Designed for the classic 1972 Chevrolet Impala B-Body, this custom forged wheel set combines a distinctive open-lattice face with a staggered 24-inch configuration. The two-piece construction features an electroplated gold center and a brushed-polished outer lip, creating a detailed contrast between the intricate spoke pattern and the polished wheel profile.
With 24×9.0 front and 24×10 rear sizing, this setup is developed around the vehicle's mounting dimensions and overall stance. The 5×127 bolt pattern, different front and rear offsets, and 78.1 mm center bore define its fitment specifications, making it a distinctive option for classic Impala wheel builds.
| Item | Specification |
| Model No. |
RC1090-5XXT |
| Size |
Front Size: 24×9.0 Rear Size: 24×10 |
| PCD |
5×127 (5×5 in) |
| Offset (ET) |
Front Offset: ET+8 Rear Offset: ET+2 |
| Center Bore |
78.1 mm |
| Weight |
20.7 kg / 21.3 kg |
| Load Rating |
Not stated on the specification plate |
| Lug Seat |
Not stated on the specification plate |
| Finish |
Electroplated Gold Center with Brushed-Polished Outer Lip |
| Construction |
Forged Two-Piece |
| Fitment Basis | Check Data |
| Lead Time | 45 days |
This 1972 Chevrolet Impala forged wheel project combines a staggered 24-inch configuration, two-piece construction and a detailed open-lattice face. XT Forged's engineering process focuses on three defining aspects: vehicle-specific fitment, structural wheel assembly and the electroplated gold finish.
The wheel set was developed around the submitted vehicle measurements, using a 24×9.0 ET+8 front specification and a 24×10 ET+2 rear specification. Both wheels feature a 5×127 mm (5×5-inch) bolt pattern and a 78.1 mm center bore.
Although 5×127 is a commonly used mounting pattern for this vehicle platform, bolt pattern alone does not confirm direct fitment. A 1972 Chevrolet Impala may retain its factory front drum brakes, use an optional disc brake configuration or have undergone hub and brake conversions. Hub mounting surfaces, wheel studs, lug-seat profiles, brake caliper clearance, suspension clearance and tire dimensions must therefore be checked against the actual vehicle.
The wheel uses a two-piece bolted construction, with a forged center connected to a separate barrel and outer lip through a visible perimeter bolt circle.
The open-lattice face features intersecting struts and multiple small openings. Material is removed from selected areas of the face while maintaining the designed strut geometry and connection to the hub mounting pad. The perimeter joint connects the center assembly to the barrel, completing the modular wheel structure.
The finished front and rear wheels weigh 20.7 kg and 21.3 kg respectively. This is a bolted two-piece forged wheel design, not a beadlock wheel.
The gold center is produced through an electroplating process rather than a painted surface treatment. The process includes substrate polishing, chemical activation, plating deposition and final surface inspection.
Because the lattice face contains numerous small openings and narrow strut edges, plating consistency requires attention to surface coverage across the intersecting sections without bridging the openings or creating excessive buildup.
The outer lip is finished separately through brushing and polishing. Its exposed surfaces are protected during the center-plating process to maintain the contrast between the gold lattice face and the brighter outer lip.
The separate finishing operations are an important part of the manufacturing sequence and contribute to the overall 45-day production schedule.
The completed wheel set brings together a staggered 24-inch configuration and a distinctive open-lattice design developed for the 1972 Chevrolet Impala B-Body.
The 24×9.0 front and 24×10 rear specifications create a differentiated front-to-rear wheel profile while retaining a consistent 24-inch diameter. The 5×127 bolt pattern and 78.1 mm center bore reflect the submitted mounting specifications, subject to final vehicle fitment verification.
The open-lattice forged center gives the wheel face a detailed geometric appearance. Its intersecting struts create multiple openings across the center, while the electroplated gold finish emphasizes the spoke pattern. The brushed-polished outer lip provides a contrasting perimeter that frames the gold center.

Planning a custom 24-inch wheel setup for a classic Chevrolet Impala? XT Forged develops two-piece and multi-piece forged wheels based on vehicle-specific hub dimensions, brake configurations, suspension requirements and tire specifications.
This custom 1972 Chevrolet Impala forged wheel setup features a staggered front and rear configuration, developed around the submitted B-Body vehicle specifications.
Front Wheel: 24×9.0, ET+8
Rear Wheel: 24×10, ET+2
Bolt Pattern (PCD): 5×127 mm (5×5 inches)
Center Bore: 78.1 mm
The 5×127 mm bolt pattern should not be confused with the 5×120.65 mm (5×4.75-inch) or 5×120 mm patterns used on other GM vehicle applications. Matching the bolt pattern alone does not guarantee direct fitment.
For a 1972 Chevrolet Impala, the actual hub dimensions, wheel mounting surface, lug-seat profile, brake configuration and suspension clearance must be checked before installation. Vehicles with aftermarket brake conversions or modified suspension may require additional fitment verification.
These 24-inch forged wheels use a bolted two-piece construction, consisting of a forged center connected to a separate barrel and outer lip through a perimeter bolt circle.
The open-lattice center features intersecting machined struts and multiple openings, creating a detailed geometric wheel face. The separate barrel and lip complete the wheel assembly while maintaining the designed front and rear widths.
The finished wheel weights are:
Front 24×9.0: 20.7 kg
Rear 24×10: 21.3 kg
The perimeter fasteners form part of the two-piece wheel assembly. This is a modular bolted forged wheel design, not a beadlock wheel, and should be specified accordingly when comparing custom wheel options.
The distinctive finish combines an electroplated gold center with a separately finished brushed-polished outer lip. Unlike painted gold finishes, the center undergoes substrate polishing, chemical activation, electroplating and final surface inspection.
The open-lattice spoke pattern requires careful plating control across narrow struts, intersecting sections and small openings. The plating process must maintain consistent surface coverage without bridging the openings or creating excessive buildup along the spoke edges.
The outer lip is masked during the center-plating process, then finished separately through brushing and polishing. This separate treatment preserves the contrast between the gold center and the brighter outer lip.
Because the two surfaces require different preparation and finishing procedures, the complete manufacturing schedule for this custom two-piece forged wheel set is approximately 45 days, covering machining, assembly, electroplating, lip finishing and final quality inspection.
This set uses a staggered 24-inch configuration, with 24×9.0 ET+8 wheels at the front and 24×10 ET+2 wheels at the rear.
The wheels are specified with a 5×127 mm (5×5-inch) bolt pattern and a 78.1 mm center bore. Actual hub and brake configurations should be checked before installation.
Final compatibility depends on the vehicle's hub assembly, brake configuration, suspension, steering and tire dimensions. A physical fitment assessment is recommended before ordering.
This product uses a forged center connected to a separate barrel and outer lip with perimeter bolts. It is a modular two-piece wheel, not a beadlock wheel.
The center receives an electroplated gold finish. The outer lip is masked separately and finished through brushing and polishing to create the contrasting surface appearance.
The listed production lead time is 45 days. This includes the machining, two-piece assembly, gold electroplating, lip finishing and final quality inspection.